Restoration of the Roof System on a Corn Crib

Featured

Here at Green Mountain Timber Frames, we have spent the last couple of days working on repairing, sorting, and preparing the roof boards for a little corn crib for sale that dates to the 1800s. corn crib for sale_Vermont Timber Frames

This homemade corn crib was used by a local farm family for generations. We purchased it and took it apart carefully because the sills were completely gone and it was beginning to settle back into the earth.

A future blog will get more into what makes this corn crib really special and how it will be used, but working on the roof this week got me thinking that I would like to lay out in a blog our process of restoration as it involves roof systems and roof boards.

Old Barn Restoration: The Process

Our first step when we get the frame labeled, disassembled and home is to pull the many antique nails. And I mean many! When a frame comes to us, it has usually gone through several generations of roofing material. Often our barns were first roofed with cedar shingles. This roof will last for 30 to 40 years before it has to be replaced.

From Slate to Cedar Roofs

A barn built in the 1700s had at least two or three iterations of cedar before the next big event in New England roofing: the development of the slate industry. In between these generations of roofing materials, the nails were tapped down into the boards rather than being removed. That leaves it to us to get all that metal out. It is fascinating to see the generations of nails in a single board- from hand forged, to cut, to modern wire nails. We tap them from the inside first, careful not to mark the show surface with our hammerheads. Then we flip the board over and pull them out. We save the handmade nails, and throw the rest into our metal recycling bin. Removing nails to restore wooden beamsRemoving nails to restore wooden timbers

Washing the Timber Frame and Boards

Next, we wash the frame and the boards. It is amazing to watch two hundred years worth of grime fall away from the boards! It feels like painting in reverse – allowing the incredible patina to come through that only a century or two of light and air can create. It is a process that requires great care; if we wash with too little pressure, the patina does not come out, but if we use too much pressure or pause in mid-stroke, the water will raise the grain of the wood and cause an unsightly mark. IMG_3482

We can not put away the boards when they are wet because of the risk of mold. So we dry them in the sun like so much laundry on washing day. The end result of all this handling is worth it when we see the sun shining off these vintage boards. They will make a stunning ceiling when the barn is re-erected. Restored timbers drying in the sun

Reassembling the Rafter System

Next, we are ready to assemble the rafter system. We make any necessary repairs and replacements to the rafter system, and then we assemble one half of the roof at a time. In the next photo, you can see the five-sided ridge beam from a restoration we completed last summer. That particular roof had four braces that went from rafters to ridge beam.

5 sided ridge beam barn restoration

We check the peg holes to make sure that the new pegs will hold strong and true. If necessary, we re-drill a peg hole where a “new” rafter was installed or where we made a repair to a rafter tenon.

restored timber rafters | Green Mountain Timber Frames

Laying out the Timber Roof Boards

Now we lay out the roof boards. All the roof boards are labeled as we take the barn down, but we very often have to straighten some edges and switch out fatigued boards for others with similar color. Remember all those generations of roofing material? Very often there was a drip somewhere at the end of the lifespan of each layer of cedar, and thus very often we have to replace some of the boards.

There are blond “shadows” on the underside of the boards where contact with a rafter shielded them from light and air. We do our best to line these shadows back up on top of rafters. Complicating this process is the fact that half-round or hewn rafters are rarely straight, so the spacing of the shadows varies depending on the spot in the roof. Doing this work while flat on the ground at the shop allows us to be as careful as possible with color matching, board spacing, and shadow hiding. Luke Larson | Green Mountain Timber Frames

Restored roof boards

Checking the Roof Board Labels

As our final step in this part of the restoration process, we carefully go through the boards and check the labels. We have a system of marking the outside of the boards so that we can efficiently apply them when the rafter system is standing.

Timber Frame Label System

The end result is a timeless visual ceiling. Or, perhaps we should rather say time-full. Here is what it looks like on one of our completed frames that now stands as a barn home:

Restored Timber Frame Ceiling

Back to Roof Restoration!

Let’s get back to that roof restoration that we completed yesterday. Here are a few more photos from this week’s restoration of our little corn crib roof. With a footprint of 14×18, this barn is a miniature of some of the larger barns we work on, but it is not small or modest in craftsmanship.

The half-round rafters are beautifully tenoned into the five-sided ridge beam, and the rafter tails have an elegant “swoop” at the eve. When we put this frame back up on its new foundation, the roof system will be ready to support many future iterations of roofing materials.

Stay tuned to learn more about this restoration, and about the exciting future home for this frame.

Have questions about restored barns? Dream of living in a timber frame home?

Contact me!
Luke – 802.774.8972 | Luke@GreenMountainTimberFrames.com

Below – enjoy more pictures from the roofing project!

Tenons on the Pawlet Corn Crib rafters

Tenons on the Pawlet Corn Crib rafters

IMG_2620

Rafter tails with swoops on the Pawlet Corn Crib

GMTF Takes Timber Framing to the Water: The Boat House Project

.Reading this in your email? For easier reading – Click here.

In our latest timber frame project, Green Mountain Timber Frames took to the water! We put in no less than 1000 hours of work to build this gem of a boat house:Timber Frame Custom Boat House Green Mountain Timber Frames

We built the new timber frame structure on beautiful Lake Bomoseen – literally on and over the lake. 

Lake Bomoseen_Green Mountain Timber Frames

Lake Bomoseen

The goal was to build a post and beam structure over a boat mooring, allowing a boat to come inside, be lifted out of the water and stored for the winter. 

Inside the Boat House_Green Mountain Timber Frames_Luke Larson

The view from inside the Boat House

Hemlock and Oak Wood, from the Property

One particularly exciting aspect of this project is that the hemlock and oak were cut from the property using a portable saw mill. Only on a few rare occasions has Green Mountain Timber Frames been able to cut a new timber frame using materials from the land where the structure will be built­. Luckily for us, this was one of them!

Designed in Collaboration with the Owners

When it came to designing the boat house frame, our very own Luke Larson worked closely with the property owners. It was a great pleasure to work together to create a design that fit the goals and desires of the owners and also worked structurally.

One of those goals was to have an attractive shed roof across the gables. We decided to accomplish this with a secondary top plate, which we started calling an “outrigger,” that turns the corner and wraps across the gable ends.

Outrigger detail of boat house_luke larson_Green Mountain Timber Frames_Vermont

aerial view of timber frame boat house_Green Mountain Timber Frames_Luke Larson

View of “outriggers” from afar

The various dimensions of this frame were each built on saw horses in our yard, so that we could check all the math, angles and joinery as we went.

aerial view of timber frame boat house_Green Mountain Timber Frames_Luke Larson

Using saw horses to work on wall of the Boat House

We used king post trusses to frame the bents and curved oak braces throughout the frame.

Timber frames_Green Mountain Timber Frames_Luke LarsonMost of the purlins in the frame were hemlock from the property, but we needed two pick points in the ceiling that would be strong enough to lift a 4,000 pound boat. Heavy oak purlins were installed at two places which are rated for well over 2,000 pound point loads each.

Purlins in custom boat house timber frames of custom boat house_Green Mountain Timber Frames_Luke Larson

The location of the timber frame presented challenges in getting it erected. Since the lay of the land was such that a crane or lull was not feasible, we put it up the old fashioned way – by hand.

Dan went out in his kayak to take this picture of the flag being raised. 

Flag Raising on boat house_Green Mountain Timber Frames_Luke Larson

Here is a what the rafter trusses look like with the roof boards and wall sheathing applied. These were also harvested on the property. Soon there will be a walkway around the inside edges of the boathouse.

Interior view of custom boat house_Boat house completed with siding_Green Mountain Timber Frames_Luke Larson


Corner details of boat house completed with siding_Green Mountain Timber Frames_Luke Larson

We were especially happy with how the hip corners and eve purlins turned out visually.

Custom Boat House_Boat house completed with siding_Green Mountain Timber Frames_Luke Larson

Next, the structure will receive beautiful salvaged windows, carefully restored, and a layer of cedar shingles on the walls. There will also be triangular windows in the peak. Take a look!

Boat house completed with siding_Green Mountain Timber Frames_Luke LarsonInterested in your very own timber frame boat house? Have another timber frame project in mind? Green Mountain Timber Frames specializes in historic timber frames and restoration projects, but we also erect new timber frames.

Contact us with any questions! Email Luke@GreenMountainTimberFrames.com or call 802.774.8972.