Disassembling the Waterford Corn Crib

Featured

waterford corn crib barn cabin green mountain timber frames

Last week we began to disassemble the first of four barns that we will be removing from a property in Waterford, Vermont. All have fallen into disrepair, and the property owners have chosen to see us remove and save the old barns rather than have them deteriorate further.

Below is a beautiful photo taken in the late 1800s in front of the group of barns on the historic Daniels Farm:

Daniels Farm family and barn circa 1898

How I would love to know the occasion that led to this photo being taken!

The farm was once a thriving scene, with over 1500 acres in agriculture. Removing this many barns far from our home base is quite an undertaking, so we decided to start with the smallest of the structures.

You can see our early 1800s corn crib in the far left of the next photo, nestled in back of the two larger barns:

Carriage Barn photo from 19th Century Vermont

This fantastic timber frame structure was originally built to dry and store the corn that was grown on the property. Our first clue to this early history was the classic corn crib siding- narrow vertical strips that have gaps between them in order to allow ventilation for the corn stored within.

In the next photo, you can see one of the corners of the building with the siding still in tact.

corn crib siding on the Waterford Corn Crib Green Mountain Timber Frames

We received affirmation of the original purpose for this barn when we looked up at the roof trim. Do you see it?

corn cobs showing through the soffet trim on vintage corn crib green mountain timber frames

Over the frame’s early years, critters were enjoying the nicely dried corn on the cob. It was probably raccoons that dragged corn up into the eves of the building for their evening meal. I am sure they were very grateful for all that good ventilation to keep their corn dry!

Removing the Roof Boards from the Barn Frame

Once we had the barn cleaned out, we began to remove the roof boards, labeling each one so that it can go back to its original home on the hand hewn rafters.

roof boards stripped from 1:2 waterford corn crib

We also labeled all the beautiful siding boards. As is common with many of the old barns that we restore, some of the boards were replaced about one hundred years ago. We were noticing the uniquely strong circle saw marks on these boards when an older neighbor stopped in to chat.

He explained that there was an early water saw just down the hill, and that he had dug up old wooden water pipes in his field that had channeled water to the sawmill. It was so wonderful to hear some of the local knowledge about the story of this farm and the barn!

waterford corn crib gable siding removed green mountain timber frames

Once the roof boards, rafters, and siding had been removed, we set to work popping out the ash pegs that have held the joinery in place for so many decades.

popping the pegs on the Waterford corn crib vintage frame

Here is a view of how tightly the trees have grown up around the unused structure:

waterford corn crib tucked into the woods - green mountain timber frames

Due to disuse, wet ground, and trees growing so close to the barn, the sills have almost disappeared into the ground. We will have some work to do in repairing these post bottoms, but it will be well worth it to give this gem another life-span.

Carpenter Ants Leave Their Mark on the Frame

We received a surprise when we exposed one of the post top tenons. In the first of the photos below, you can see the incredible sculpture that carpenter ants created, much to my chagrin! They have chewed away all but the thinnest of strips- just enough to not collapse their own home. This post will be replaced from our inventory of hand hewn timbers. The second photo shows one of the healthy tenons in the barn. Now that is how a two hundred year old tenon should look!

In the next photo, we are lifting the top plate off of the posts.

removing the top plate on the Waterford corn crib green mountain timber frames

When we return next week, we will lower the bents to the ground, label the posts and ties, and finish cleaning up the site.

This Old Barn Is for Sale!

This 16×20 corn crib, with its full second floor, will make an incredible little cabin or garden shed once we have restored the timbers.

Aside from wanting to start our large project in Waterford with the most manageable of the four barns, there was another important reason to delay the disassembly of the largest- a 32×42 gunstock timber frame. There is a family of Eastern Phoebes nesting under the eve. We learned that, incredibly, it takes only 16 days from when a Phoebe egg hatches till the birds will take flight from the nest! We will make sure they have flown before we begin disassembly of this magnificent barn.

When I stepped into the gunstock barn on Friday, I realized that the phoebes were not our only winged friends making use of the space. This little fellow had flown down from a nest and was taking a rest on a beautiful antique bow saw.

robin fledgling on bow saw in waterford gunstock frame green mountain timber frames

It seems the family of robins is already on the move! Stay tuned for more information on this large gunstock barn that has been home and habitat to so many over the last two hundred years- from farmers to pheobes.

robin fledgling in the Waterford gunstock frame green mountain timber frames

Do you dream of living (or working) in an old barn?

Contact Us!

 

 

An Ode to Farmers: The Incredible Ingenuity of Past Barn Repairs

Featured

Today, Matt and I were visiting barns on behalf of the Green Mountain Timber Frames team. I am constantly amazed by the creative ingenuity of New England’s early farmers. These brave souls were—and are still—truly a backbone of the beautiful and communal aspects of our local New England culture.

An Ode to Farmers

Having grown up on a working dairy farm, I have witnessed the challenges that face farmers on a daily basis. Thinking of my father, my mother, and my grandfather as they strived to keep a farm running, I pondered the necessity for creativity and tenacity when it comes to getting that hay bailer or tractor running when it is desperately needed. I believe the same principle applied to the ways in which early farmers dealt with their timber frame barns.

Today, as we assessed one particular barn, we discovered some very clever repairs made to the frame over the years. We were inside an incredible 32×52 hand hewn timber frame barn that is badly fatigued and in need of help.

vintage timber frame barn home | green mountain timber frames

Unfortunately, the barn abutting this one was in much worse shape, and I felt quite deflated and heartbroken to see it.

collapsed vintage barn | Green mountain timber frames

This collapsed building still has a few vintage boards and timbers that can be salvaged.

But let’s return to the happier prospect of the barn we had come to see.

52-Feet of Chesnut Timbers

It was built very early, and has many American chestnut timbers. The rafters are hewn, and the posts are massive at 11×11 inches. Of the four timbers that span the length of the building, 3 are an incredible 52-feet of continuous hand hewn chestnut, with the fourth having a scarf joint to join two timbers together.

Imagine that: 52 foot American chestnut timbers that were shaped with a broad axe and an adze- and lots of spirit and grit.

Incredibly, one of the bents is a clear-span 32-foot timber truss. This means it was built strong enough to not need any interior posts, allowing the farmer to move a wagon and animals around inside with ease. In the next photo, you can see the two chestnut timbers that create the truss. They are tied together in the middle with a vertical timber, creating a remarkably strong system.

chestnut timber truss vintage barn | Green mountain timber frames

What about the clever repairs?

It seems that at some point in the history of this barn’s use, the lower timber, which measures 11 x 18 inches by 32-feet, developed a split. Matt and I were studying the repair that was done in the past, and we realized that it was made using the metal rim of an old wagon wheel!

giant chestnut timber frame truss Green mountain timber frames

Here is a close-up of the ingenious repair, recycling no doubt a farm implement that’s use had gone by the wayside:

wagon wheel repair to chestnut timber | Green mountain timber frames

We also discovered a wonderful thing for us modern timber framers to see: a likely mistake made by our mentors who lived two hundred years ago. In a way, it is refreshing to see that even those incredible craftspeople from the past occasionally made an error like we sometimes do!

One of the 32-foot timbers did not have a typical tenon. It sure looks like someone cut this timber too short. We have all been there who have cut mortise and tenons time after time. It is a big “whoops” when it involves an 11 x 18 inch by 32-foot American chestnut timber that was cut and hewn by axe and adze!

In the next photo, you can see where a spline was added to the end of the girt, essentially adding back the section that was missing. If you look carefully at the underside of this massive timber, you can see where a 2-inch plank was let in, and then pegged thoroughly.

sprine repair on vintage timber frame chestnut beam | Green mountain timber frames

This ingenious repair reminds me of a saying given to me by a wise builder when I was starting out as a framer:

“The sign of a great carpenter is not whether you make mistakes or not; rather, it is about how creative you can be about fixing your mistakes when they happen!”

I am trying to remember what error I had made as a 22-year-old to earn me that old “chestnut” of wisdom. I don’t remember what it was, but I am grateful for the lesson that was imparted to me that day, and I remember it still. Well, the repair in this barn held up well. Approximately 210 years, and holding strong!

splined repair to chestnut timber frame

Speaking of holding strong, we saw a real example of the strength of a single oak peg, or trunnion, used in the old days to fasten the timber joinery together without the use of nails. As I mentioned earlier, this barn is struggling, and due to a leak in the roof, one of the 32-foot girts that span the building has rotted completely away.

Incredibly, the 12-foot post that used to be supported by that missing timber is still in the air as part of the queen system supporting the rafters. Here it is:

strength of a single peg in vintage barn

It is amazing to me how these well-crafted barns can hold together in spite of serious distress! Just one peg. Hm, that seems like a possible metaphor for what each of us humans can do for holding together the values that we treasure in our communities. I will save that musing for later. But think about it- a single one-inch peg holding up that 12-foot hardwood post. Incredible.

Just a couple miles from this grand old barn, there stands another. Unfortunately, the main structure is beyond restoration. But when I climbed into the icy basement, I was amazed by a support for the barn that was added sometime in the first half of the 20th century. Clearly, the floor system had been sagging, and a clever farmer knew just how to form up a support for the beams.

Once again, a derelict symbol of past farming practice was recycled. Just take a look at this:

creative concrete forms green mountain timber frames

Old wooden barrels, no doubt leaky or just no longer used, were stacked up with the bottoms cut out. After that, it was as simple as pouring in the concrete! The wood of those barrels is long gone, but their “fingerprints” left no doubt how this impressive pier was created.

Here is to all those who have worked creatively to sustain and stabilize these majestic structures from the past, and also to all in our communities who desire to see our cultural farming heritage preserved for the future!

May those of us dedicated to preserving these structures be as creative, industrious, and as dedicated as those who have come before us.

Interested in one of our old barns for sale?

Give us a holler!

 802.774.8972

 

Dunlap Barn Restoration, and Discoveries about a Civil War Veteran

Featured

This past week, we finished the barn restoration of a structure from around 1850. The old barn stood next to a dirt road in Brandon, Vermont. Thanks to the commitment of the family that now owns the property, the barn, which was in very bad shape, is now restored and re-erected on the same land.

restoration barn home green mountain timber frames

Remembering a Civil War Veteran

In digging into the history of this particular barn, we found that a casualty of one war is tied to the history of the barn that we have just restored. Next to the original barn location, we found the burial site of William Dunlap. The gravestone tells that he was part of the Vermont 12th infantry and that he died July 31st, 1863, at the age of 25.

I would like to pause here and take this opportunity to thank our veterans for their service to this country. In particular, I want to acknowledge and express gratitude to one of our own team, Andy, who served in the army for eight years. So many have served, and the sacrifices are tremendous.

In the next photo, Andy and I were finally able to read the memorial stone for Dunlap. We had stopped earlier on a clear day, and could not decipher the faded engraving. However, something about the rain running down the stone on this particular day allowed us to read the words.

William Dunlap, Vermont 12th regiment green mountain timber frames

It was a surreal moment to be at his grave and to reflect on the life and death of this young man. He joined the 12th regiment that went into camp at Brattleboro on September 25, 1862. The group was mustered into United States service on October 4 and left Vermont on October 7 for Washington DC. It seems likely that William never returned to the hills of Vermont before his death. The Vermont 12th was near Gettysburg for that significant battle and was assigned to protect the corps train. Like so many in the Civil War, William died in a Virginia hospital of a simple disease just days after the Battle of Gettysburg.

William Dunlap 12th vermont regiment civil war veteran green mountain timber frames

It has been poignant to think about William. We reflected at his graveside on the likelihood that William spent his youth playing and working in this barn. While we have not been able to date the construction of the barn exactly, we believe it was built sometime between William’s birth and when he was a 12-year-old child. At the time of his death, the body was sent home to Vermont to be interred on the family farm.

While erecting the frame, we met another young man in his twenties. His grandmother has property nearby and he told us of swinging on the rope that was hanging in the hay loft of the barn. It is amazing to hear these stories—book ends on the story of this barn as it stood on its original foundation.

Now the frame stands again near the grave of William, and we are very grateful and proud of how the restoration turned out. I will take this opportunity to show some photos of the restored structure and the process of putting it back up.

Reerecting the Restored Barn

We erected the four bents first. These wall sections form the width of the building. The raising process took place during some very wet and overcast weather, and we even worked in falling snow on one of the days.

lifting a bent green mountain timber frames

Next, we set the 38 foot top plates onto the bents. In the next photo, Isaac checks the post tenon that is about to receive the top plate. In gunstock frames, the post has 2 perpendicular tenons at the top: one for the girt and one for top plate.

pegging a bent green mountain timber frames

barn raising top plate green mountain timber frames

A Modified Gunstock Timber Frame

The Dunlap barn is a style that is called “modified gunstock.” All gunstock frames had tapered posts that increase in size from post bottom to post top. These frames had this feature in order to provide increased bearing for the support of the upper horizontal timbers.

The posts get their name from the way in which they look like the upside down stock of a rifle. In a modified gunstock, the taper is oriented parallel with the eve of the building. The most important feature of gunstock frames is that the girt (beam going the width of the building) and the top plate (long beam going along the eve of the building) are at the same elevation. This makes an incredibly strong junction of timbers.

antique gunstock timber frame green mountain timber frames

The Dunlap barn has beautiful labels on the timbers and braces. These markings, sometimes referred to as “marriage marks,” were used to match each joint with its partner. Early frames were built flat on the ground before being erected, and each joint was scribed into its place. On raising day, the marriage marks ensured that each brace went in the proper place. We love studying these labels!

viewing vintage marriage marks on barn green mountain timber frames

Here are the marriage marks between a brace and its post:

marriage marks vintage timber frame green mountain timber frames

This frame had a couple of unique features in the rafter structure. First, the queen system that supports the rafters at mid-span had struts or braces that come from the posts down towards the center of the building. It was more common for these posts to be braced towards the eve in order to resist outward thrust of the roof load that could push the walls apart.

In a gunstock frame, where all the horizontal timbers come together at the same height, there is already incredible strength resisting outward thrust. For this reason, it was more important to these early craftspeople to install braces against the downward force or weight of the roof system and snow load that could push the queen posts in.

gunstock frame barn home green mountain timber frames

The second somewhat unusual feature in this barn is the way that the rafter system is braced to the five-sided ridge beam. In later buildings, there were often braces out on the two ends of the roof system. In this case, the timber framers installed a pair of braces right in the center of the roof.

vintage barn restored queen system green mountain timber frames

Installing the Roof Boards

We were able to reuse about 60% of the original roof boards and supplemented these with a few of the original wall boards as well as vintage material from our inventory. There were some beauties that went onto this roof! Imagine the size of the pine tree from which these boards were sawn.

beautiful barn boards green mountain timber frames

We are grateful that we had the opportunity to save and restore this vintage timber frame, and we are especially glad that it will remain not far from the resting place of William Dunlap, 12th Vermont Infantry.

May we respect and honor all our veterans as we work for peace in this world.

Camp Moonrise…Or How Our Old Barn Home on Lake Champlain Found Its Name

Featured

Steven KelloggToday’s guest post comes from the talented author and illustrator, Steven Kellogg. We so enjoyed working with him and are honored to have him write for our little blog! 

I am an artist who, for decades, on rambles throughout the northeast, has admired old barns. Recently, I have been thrilled with the acquisition of a rugged, hand hewn barn frame The barn itself had been slowly deteriorating on the abandoned farm it had once served, and then was subsequently rescued, and restored.

4

The historic gunstock frame stood tall and true on the Champlain Island of North Hero

It came into my life because, with our family grown and my wife having developed some health issues that required a residence that is handicap accessible, I decided to build a home with supportive features to accommodate those needs on a piece of property on the shore of Lake Champlain that we had owned for a number of years.

I envisioned a house with several spacious, wheelchair accessible rooms overlooking the lake, that, most importantly, would have an old barn at its core. The interior would be designed so that classic proportions, a richly-toned original ceiling, and sculptural, hand hewn beams would serve as the major architectural themes.

Window View_Steven Kellogg Timber Frame Home

The windows look out over the beautiful lake, and towards the barn’s original location

My search for just the right barn led me to Dan McKeen of Green Mountain Timber Frames, and then to his friend and colleague, Luke Larson, a master carpenter in Middletown Springs, Vermont. They had a number of impressive barn frames available in their inventory. Each one had been rescued from its original location on the farm where it had originally served. Each of these restored barn frames was like a rural cathedral with beautiful, simple, architectural lines, massive, hard wood beams, and magnificent notched and pegged construction.

Amongst these treasures, one of them stood out because of its superior details and appropriate size. I could picture it perfectly on our property. This particular historic frame came with added appeal: it was originally built around 1780 on one of Lake Champlain’s North Hero Island farms, not far from its prospective new home on our wooded knoll overlooking that very same lake.

When Luke and his skilled crew erected the barn frame on our wooded site, it seemed so harmoniously situated that it gave the impression that it had always been there.

Because our land is on the New York side of the lake, we resolved to honor the Adirondack tradition of calling rustic lakeside and woodland homes “camps” and giving them names. Prompted by the fact that the reconstructed North Hero Island barn faced our favorite monthly spectacle — the full moon lifting above the Vermont mountains and the lake — we decided it would henceforth be known as “Camp Moonrise.”

Interior View_ Steven Kellogg Timber Frame Home

The sign over the hearth reads “Camp Moonrise”

Now that we are happily putting down roots in this beautiful building and enjoying every hour of living here, we will be forever grateful to Luke, Dan, and their team of master craftsmen for their passion for old barns and their creative talents, which made this opportunity available to us.

Read more about the process of restoring this old barn in this blog.  For the Camp Moonrise project, Green Mountain Timber Frames partnered with the talented staff at Cloudspitter Carpentry and Hall Design Group.


More Images of the Beautifully Restored Barn HomeCamp Moonrise

This slideshow requires JavaScript.

Roofing Material: A Weighty Decision!

Reading this in your email? For easier reading – Click here.

I remember one time as a kid when a great-uncle told me about the historic New England turkey drives. As I listened open-mouthed, he told me that New England farmers of the 1800s used to join up in the fall to collectively bring all the turkeys they had raised down to Boston. It was before the days of the interstate and refrigerated trucks, and as he recounted, they would shepherd thousands of turkeys across the countryside over a number of days.

vermont-wild-turkeys

The turkeys would collectively roost on the ridges of country barns every night. “And that, my friend, is why so many Vermont barns have big sags in the ridge line – it was the weight of all those fat turkeys on their way to market!”

To this day I am not totally sure if he was pulling my leg completely about the “historic turkey drives,” but one thing is for sure: there are indeed many historic barns with saggy roofs. In our voyages around New England viewing barns, we very often find sway-backs. That is, buildings where the roof has sagged dramatically under the weight of slate.

The history of our slate industry

Green Mountain Timber Frames has its base of operation right on the edge of a slate valley and it is fascinating to think about the interplay of geography, geology and population movements as it relates to this industry. Slate first gained attention in our area around 1834. The first known barn to receive a slate roof in our area was in 1848. By the end of the 1800s, the slate industry in our valley was booming, bringing in groups of skilled quarry workers from Wales, Czechoslovakia, Poland and many other parts of the world where people had experience with slate.

Before this, our barns were roofed using hand-split cedar shakes.

handsplit-shingles-or-shakes_historic-roofing

Hand split shakes – image courtesy of http://www.nps.gov

Builders would cut cedar logs into 30 to 36 inch lengths and then split them into shingles using a tool called a froe. In some places where there were not readily available streams for early water powered sawmills, builders would forego roof boards completely. Instead, they would heavily brace the rafter system to make it ridged, and then would install strips of wood called purlins spaced up to 36 inches apart. They would then apply long hand-split cedar shakes directly to the purlins.

From cedar to slate

Cedar is a natural, light, and wonderful roofing. Like the planking on an old wooden boat, it would have large gaps when dry. As soon as the first rain drops soaked in however, the cedar would swell and shed the water beautifully!  However, cedar roofs last only a few decades. As the cedar started to fatigue on our earliest barns, farmers began to replace it with slate. What could be better than a local product that will last as roofing for 200 years? What farmer really has the time to replace cedar every few decades?

There was just one little problem…cedar shakes weigh about 400 pounds per 100 square feet. Slate, on the other hand, weighs as much as 1,000 pounds on that same roof surface! On a typical 30 x 40 barn, this means that the new roof weighed as much as 9 or 10 tons. For a barn designed for a lightweight roof, trouble came a-visiting, especially when the heavy Vermont snows also piled high on top of the slate.

before-and-after-barn-transformation

How does geography fit into this?

Here at GMTF, we have recently viewed a number of barns in northern Vermont. These structures were far from the slate quarries and were thus more likely to receive roof makeovers with multiple generations of cedar, followed by lightweight metal roofs (once that industry came into full swing.) We find that, unlike with slate, many more of these northern barns survived with roof-lines in tact.

How do we restore these barns?

There are several building techniques that we use to rehab a barn that was built for cedar rather than our modern heavier insulated roofs.

We find that the old barns with ridge beams faired much better over the past couple of centuries.

1790-barn-with-5-sided-ridge-beam

This 1790s frame received slate mid-life, yet look how straight the roofline remained because of the 5-sided ridge beam!

To further strengthen a ridge beam roof system, we sometimes add vertical posts going from heavy timbers to the ridge beam. This transfers the weight straight down and minimizes the outward thrusting forces that otherwise can push the eve walls out.

historic-timber-frame-barn_green-mountain-timber-frames

In this historic barn, there are posts going up to the ridge beam to further strengthen the structure.

 

As builders became aware of the weight issue, they often added a “queen system.” This is a structural system that picks up the weight of the rafters at mid-span and transfers this weight down to the heavy girt timbers and posts. On many of our oldest barns, we use vintage timbers to create this type of a system.

barn-featuring-queen-system-as-rafter-support_green-mountain-timber-frames

This  “queen system” helps to support the rafters.

queen-system-for-rafters-with-vertical-posts_green-mountain-timber-frames

Queen systems come in many shapes. This one uses vertical posts rather than angled.

Another method we use to beef up the rafter system is to add collar ties to the rafters. These horizontal timbers create a triangle within each pair of rafters, which is one of the strongest geometrical shapes in nature.

collar-ties-on-north-hero-vermont-barn

We installed these old-new collar ties to help stiffed the roof on this North Hero, VT frame.

How can we repair slate fatigue in place? 

On a recent project, we were asked to help prepare the structure of an 1860s house for a new roof. The builders had sized their rafters for a light roof and then installed slate. The sag was tremendous. We did not want to disturb the original plaster of the ceilings beneath the rafter system. Our solution, after the slate was removed, included first adding collar ties in the attic.

new-collar-ties-to-strengthen-rafter-system-in-old-vermont-barn

New collar ties stiffen these old, undersized rafters.

Next, we screwed 2 x 4 rippings over the top of the existing rafters and snapped straight chalk lines.

img_4006

We used a string with chalk on it to snap a straight line

Here is how it looked after we used this technique on all the rafters:

curved-shims-on-new-roof-system_green-mountain-timber-frames

Making all these curved shims made us consider going into the wooden boat building trade!

Next, we put new plywood over the whole roof and it was ready for roofing!

new-plywood-roofing-on-vermont-frame_green-mountain-timber-frames

Ready, set, and on goes a new roof!

Restored slate roof by Green Mountain Timber Frames

The finished project has a much flatter and straighter roof.

Conclusion

It is so interesting, as we travel around New England looking at barns, to imagine the various economic, geographical and sociological forces that all played a role in barn designs! We are grateful to have learned from the craftsman of the past who figured out how to properly build roof structures to withstand the various forces that material and weather throw at them.


Want to live in your very own historic barn?
Let us know!

802.774.8972 or Luke@GreenMountainTimberFrames.com

  • To learn more about the fascinating history of slate, check out the fantastic Slate Valley Museum in Granville, NY.

The Amos Hodsdon House Needs a New Owner

Reading this in your email? For easier reading – Click here.

We at Green Mountain Timber Frames have a friend and fellow “restorationist” and we are very excited to be collaborating with him on a new project. It’s an incredible opportunity to preserve the “Amos Hodsdon House,” built in 1837.

1904 Hodsdon postcard without text cape house green mountain timber frames

Ben’s story

Hodsdon dismantle crew green mountain timber frames

Meet Ben Heywood, center

Meet Ben – An Expert in Restoration

Ben Heywood moved into the area a few years ago after a career of preservation and restoration work in the Cape Cod area. Since moving to Vermont, he has become a friend as well as a consultant on some of our projects. He has aided us in assessing the fine details of houses dating from the 1800s. He has a wealth of knowledge regarding trim, window and door styles and the dating of buildings. He has done incredible work restoring original entryways, windows, and cupboards. On a recent weekend visit, I asked Ben how he got interested in restoration.

“I was born in Gardner, Massachusetts, in 1951. There were dozens of abandoned 18th and early 19th century houses in a 40 or 50 mile radius. In the course of many Sunday family rides in the station wagon, my father would drop me at these so I could snoop around. It was arranged that I’d be picked up about a half hour later. All kinds of different architecture… it was great! It took no time at all for me to understand the difference between the handcrafted specimens and the numerous postwar boxes popping up everywhere. I also bought and devoured all the Eric Sloane books by age 16. All this sent me in the preservation direction.”

Ben’s First Home Restoration

Ben moved to Falmouth and purchased his first “vintage” house in 1978 for the price of $1! It was a circa 1815 three quarter cape with a center hall and three fireplaces. It had the original doors, wainscot, finish trim and floors. As Ben told me, “I assembled some buddies and had it down in three weeks. I’ll never forget having to buy a liability policy from Lloyd’s of London as I was young and not yet firmly established. Insurance for four weeks cost me 500 times what I had paid for the house! Most everybody thought I was nuts at the time- until they saw the place restored!”

In the decades that followed, Ben disassembled and restored around 20 period houses. He did restoration in place on another 20!

Bodfish house cape house green mountain timber frames

Ben completed the restoration of the “Bodfish” house in 1982, which overlooks Cape Cod bay.

In 2008, Ben decided to find one last gem of a house that he would restore for himself as he moved to Vermont and into retirement. Enter: the remarkable house built by Amos Hodsdon in 1837.

Hodsdon house vintage photograph cape house available green mountain timber frames

The Hodsdon house, built in 1837

Now, due to life changes and a desire to downsize his construction plans, Ben has decided not to use this house as his own. The beautiful historic Hodson House is available for sale!

And we at Green Mountain Timber Frames want to help our friend find a new family to make this house into their home.

About the Vintage House

After looking at many vintage buildings, Ben decided on a house in Carroll County, New Hampshire, named after Charles Carroll who died in 1832 as the last surviving signer of the Declaration of Independence. Carroll County was created in 1840 with Ossipee as its seat. Ben learned this history lesson after his search of Carroll County deeds came up empty. Eventually, he realized that the county lines had changed three years after the deed to the property changed hands from father to son, and so was filed in Strafford County!

Hodsdon grave stone green mountain timber frames

Ben found the gravestone of Captain Amos Hodsdon

deed Hodsdon vintage cape house green mountain timber frames

Here is the deed showing the transfer of property from father to son

When Ben discovered the old Hodson place, the house was incredibly unaltered and in good “frame health,” for its age. It had been abandoned for ten years and had been occupied by an elderly couple before that. The kitchen had a typical cast iron sink mounted in what was surely a period dry sink. There was a rusty old spigot and pipe that ran into a tank heated by the wood stove! The last residents of the house had still been carrying water into the house from a six foot diameter dug well with a flat stone cover. Best of all… the house had never had a bathroom!

Ben assembled a crew and began dismantling the frame.

Hodsdon partially dismantled frame green mountain timber frames

The roof boards come off

Hodsdon rafter system vintage house

Here is a 46 foot purlin in the rafter system!

Hodsdon frame opened up green mountain timber frames

The exposed frame

The Frame Awaits a New Owner

The frame is down, carefully stored and awaiting a new home. It is available as a complete package, including the beautifully restored trim work, original flooring materials, interior trim and wainscoting panels, the windows, and the entry. Even the staircase is ready to go back in!

Above you can see the tired entryway, and then the doorway after Ben’s incredibly meticulous restoration work.

When the house came into Ben’s caretaking, the decorative fan work over the entrance had been removed and flat boards had been nailed up. Ben studied the “shadow lines,” which are marks and weathering patterns on the wood, in an attempt to figure out through detective work what the original had looked like. Then, in a fortuitous turn of events, a friend discovered this old photograph of the house. It confirmed Ben’s guess at what had graced the entrance originally, and wait till you see what he created!

Cape House Green Mountain Timber Frames

This photo is the best rendition of the entranceway in the background. Oh, and the people in the foreground look fantastic too!!

Restored fan over entry Hodsdon house green mountain timber frames

Here you can see the incredible recreation of the decorative fan work over the doorway- all based on an early 1900’s photo!

Expertly restored windows Hodsdon cape house green mountain timber frames

Ben has even restored all the original windows!

This house boasts roughly 3,700 square feet of vintage living space. The crew at Green Mountain Timber Frames will do a complete restoration of the timber frame itself, and we are looking for someone who has always wanted to live in a beautiful New England style home!

Interested in this frame?

Know someone who may be able to help us find a home for this historical treasure? Please pass the word around that this wonderful structure is available and help us find a new “forever” location for this gem!

Contact us!

(802) 774-8972 or Luke@GreenMountainTimberFrames.com

Cavendish Barn Restoration Update – The Grand Finale!

Reading this in your email? For easier reading – Click here.

We recently completed the restoration and renovation of an historic timber frame from Cavendish, Vermont.

 

The project kicked off when we first visited the frame back in the winter of 2015. We’ve written about this barn frame before, while in the thick of the restoration process, and wanted to deliver the coda now that the project is complete.

The Background

The owners of the frame wanted to save a barn on their property; it was in bad shape and needed to be taken down before it collapsed. We first visited the barn in the winter, dismantled it in the spring, and spent the summer restoring it at the Green Mountain Timber Frames shop.

In late summer, we erected the restored frame on a new foundation.

The Transformation of a Barn

In the pictures below, you can see the entire process – from start to finish. From a wintery day in February when the sagging frame looked tired and in need of some TLC, to the beautiful great room it has become today.

Vermont timber frame in winter_Green Mountain Timber frames

Our first look at the Cavendish barn in Feb 2015

Dismantling historic timber frame barn

Spring prevails, and dismantling begins!

green mountain timber frames restoration process in cavendish vermont

A look at the last timbered wall section we took down. Once on sawhorses, we popped out each vintage peg, labeled every joint, and disassembled.

restoring post and beam structure

Restoration begins at the GMTF shop

The image below shows us adjusting the roof rafters to fit the new design of the great room. We pre-assembled the rafters, applied the original roof boards, carefully labeled each rafter and board, and then dismantled the roof before finally shipping the frame back to its home of origin.

restoring post and beam barn from 1850s

Restoration of new england barn from 1850s

Redesigned frame assembled on a new foundation about 100 yards from where it was first crafted nearly 200 years ago!

After the frame was firmly in place, another general contracting company  completed the project – The Severy Brothers  of Ludlow, VT. The next two pictures show how they used “SIPs” (structural insulated panels). The panels are fastened to the outside of the frame, which provides superb insulating value while showcasing all of the wooden elements on the interior. In the second picture, you can see the front entry taking shape.New barn home made from restored wood timber frame

Cavendish VT Barn frame with insulated panels

Exterior view of front entry with SIP panels

timber frame interior

The re-erected frame, pre fireplace. Note the beautiful ridge beam!

post and beam architecture in historic great room

The fireplace was created with stone found on the farm property

Barn door entryway to new england great room_green mountain timber frames.JPG

Sliding barn door into main house

restored timber frame home_green mountain timber frames

Large sliding doors capture the beautiful Vermont landscape

Exterior of Cavendish Barn Frame with front entry_Green Mountain Timber Frames

Timber porch entry into the great room

It was truly a pleasure to work on this barn frame. We love it when the opportunity arrises to restore a frame while keeping on its original location! Do you have an historic barn on your property that is in need of attention? We would love to see it!

 

Want to see some other projects we’ve done at Green Mountain Timber Frames?
Check out our completed timber frame projects!