Sill and Post Repairs…Plus More Split Rail Fence!

Featured

Reading this in your email? For easier reading – Click here.

We recently finished the first phase of a barn repair project in Springfield, Vermont, stabilizing a gorgeous little barn from the early 1800s.

1_Barn Repair_Green Mountain Timber Frames

History of this Historic Timber Frame

The vintage timber frame is part of the historic Kirk homestead. We believe it was William Kirk Junior who built this barn. The son of a revolutionary war soldier from Springfield, William purchased the farm in 1809, and most likely built this structure at that time.

In 1834, the land records note that William Kirk mortgaged the farm to a Mr. White for $300. It may have been a tough year for farming, or perhaps William needed cash to work on the second barn on the property, which is attached to the older frame.

 

2_Large Vermont Barn_Green Mountain Timber Frames

The large barn is connected at a perpendicular angle to the smaller old structure. Farmers often sought to create a protected barnyard area for livestock and equipment, and the “L” profile of the attached barns does just that.

The records state that the loan was to be paid back annually over three years in “good salable neat stock or grain.” William must have successfully paid off the mortgage, as the property stayed in the family for a total of 97 years before being sold.

 

In 1864, William sold the farm to his son Aaron. Thirty years later, Aaron conveyed the farm to his younger brother Reuben, a Civil War veteran who had fought in the 10’th Regiment, Vermont Volunteer Company. The property stayed in the family until 1905. Many thanks to the current owners for sharing their careful historical research with us!

A Barn in Need of Repair

While the barn had beautiful stone foundation work, the water had pushed and the frost heaved against the stone and sills, and the joinery of the structure was deeply strained. The stone wall under the gable was collapsing, and four different posts had “torn their trunnels” and dropped down out of the upper beams.

 

3_Corner Post Beam_Green Mountain Timber Frames Vermont

This corner post dropped as the sill beneath it deteriorated, and the pegs broke allowing the tenon to drop out of the mortise.

 

Our Approach to Restoration

Our project was to jack the posts back home again, and to replace the sills. The barn was listing dangerously towards an eve because braces had failed. We used a series of come alongs as we lifted posts in order to coax the wall back towards plumb.

 

4_5 sided ridge beam_green mountain timber frames

Note the beautiful five-sided ridge beam! Many of the braces had failed, and in this photo we are coaxing towards the western horizon. On the far wall, you can see where one of the posts has dropped.

As we lifted, we were able to feed the tenons home.

 

 

5_tenon to horizontal timber_green mountain timber frames

We were able to bring this tenon right back into the horizontal timber. Even the siding boards slid back into the grooved channel in the beam where they started out.

 

 

7_lifting historic barn in vermont_Green Mountain Timber Frames

Here we are lifting the corner of the building in preparation for new pressure treated sills

 

The Split Rail Fence

But wait- what about the split rail fence? After posting our last blog about the fencing used as collar ties in Tunbridge, we were surprised and delighted to discover split rail fence pieces used as floor joists in the newer and larger of the Kirk barns!

 

8_Vintage floor joist_Green Mountain Timber Frames

Old William Kirk was a resourceful fellow. Most likely the original floor joist snapped, and so a nearby rail was conscripted for the purpose.

 

A Barn Rebuilt to Last!

Now that the frame has repaired sills and is stabilized, the terrific crew at Terrigenous Landscape Architecture will re-build the dry laid stone foundation and wall on the gable end. Scott and his team have already installed a drainage system around the exterior of the barns, which will protect the repaired barn complex and stonework from future freeze and thaw cycles.

We look forward to returning to Springfield in the fall after the stone work is accomplished, to continue frame and siding repairs. In the meantime- happy fencing to all you farmers out there!


Do you have a vintage barn in need of repair? Dream of living in a historic barn home?

Contact us!
Luke@GreenMountainTimberFrames.com

 

Advertisements

Spring Cleaning!

Reading this in your email? For easier reading – Click here.

As one of the fist steps in the timber frame barn home restoration process, we power wash all the individual elements of a frame. This includes all the beams, every brace and each board that we are able to save and re-use.

Since winter in Vermont usually means sub-freezing temperatures, the piles of “dirty laundry” tend to pile up, waiting their turn with the washing team. Well, spring is here, and the washers are running!

Power washing old barn board_Green mountain timber frames.jpg

Our newest team member, John, washing a thick vintage siding  board.

Think about cleaning your house and the way grime builds up. Now imagine the dirt that collects in the hidden places of a 200 plus year old house or barn! It can be… pretty amazing!

American chestnut hand hewn barn timber_Green Mountain Timber Frames.jpg

This 26 foot long top plate has not seen the light of day, or a cleaning, since it was hoisted into place 210 years ago!

Washing beams and boards can be a tedious, wet, and cold task. Yet we also find it very satisfying and even exciting to watch the real patina and natural beauty come forth from underneath the dirt.

Timber frame beam barn home beam_Green Mountain Timber Frames.jpg

Look at the difference! This American Chestnut timber has received one pass from the power washer on the lower section.

Washing timber frame knee brace_Green Mountain Timber Frames.jpg

What a contrast between the washed surface and the dirty one!

Hardwood knee brace from Vermont Timber frame.jpg

The final product of the cleansing is an amazing color that can not be replicated in new materials.

We do not use any soap in the washing. The water alone is enough to bring out the color. Wood ages as a result of exposure to air and light. While boards exposed to excessive sunlight turn silver, protected wood surfaces take on a beautiful glow.

Vermont barn beams for sale_Green Mountain Timber Frame.jpg

It took more than 200 years for this Beech timber to take on its patina.

The Art of Power Washing Old Timber Frames

Washing barn timbers and boards is not just a matter of pointing and shooting the stream of water at the materials. If we let the powerful water get too close to the wood, or if it strikes the surface at the wrong angle, the result is “raised hair” on the surface. Too much power in the spray slightly shreds the grain of the wood, causing the wood fiber to separate slightly on the surface, which can damage the patina and lead to a rough surface. Power washing takes patience. We can’t do too much, yet we must get the surface clean. The distance and angle from sprayer to old board has to be “just right!”

When the timbers and boards are washed, there are still steps to be accomplished. The boards must be dried before they can be stacked or else they will mold. We have to get creative in spreading the boards out to dry! We flip the boards halfway through the drying process. Eventually, we are ready to collect them carefully into piles for storage under cover.

Barn style home_wide timber boards.jpg

Vintage boards drying after washing.

The timbers and boards shown in these photos are from the 24 x 26 cape style house that we disassembled this past winter.

Stay tuned as we move towards a full restoration of this wonderful little timber frame! We better get back to work- the pressure washers are calling!